Publicidad
Idiomas disponibles
Idiomas disponibles
1
NOTE: To avoid damage to countertop, install sink such
that future removal from underneath the countertop is possible.
First, make sure the clearance between the backsplash,
faucet, fixtures and cabinets are acceptable for the new sink.
For Model 0426 to be ADA compliant thte sink must be
installed with the overflow in the rear.
2
Carefully cut out the enclosed template, then position
and trace the template on the countertop as shown on
the template. Make a mark of the faucet hole centerline
on the countertop. Drill a 1/2" pilot hole on the inside of
the cut line. Use a saber saw or a keyhole saw to cut out
the countertop opening.
3
FOR WOOD COUNTETRTOP
Mark and pre-drill the wood screw holes
as located on the enclosed template.
Waterproof any exposed areas of wood.
4
FOR MARBLE OR SOLID SURFACE COUNTERTOP
To protect countertop, place it on
a foam padding and drill 3/8 Dia. X
1/2 deep hole as per location shown
on template.
730555-100 Rev. 7 (12/23)
Perimeter of Sink
Clip
Drill 1/8 dia. X 3/8 deep
#10 Wood Screw
3/4 MIN.
#10-24 Machine screw
Cutout
3/4 MIN.
Brass insert, epoxy in
place with threaded end
exposed. (Epoxy not
supplied.)
Clip
Publicidad
