Sunrise Medical DeVILBISS RPM AutoAdjust 9054 Serie Manual página 9

I n t r o d u c t i o n / P a r t s / A c c e s s o r i e s
INTRODUCTION
Indications
The 9054 series DeVilbiss RPM AutoAdjust CPAP is intended for use in treating obstructive sleep apnea in adult patients (greater than 66 lbs/30 kg).
What is Obstructive Sleep Apnea (OSA)?
Obstructive Sleep Apnea (OSA) is a condition where the upper airway relaxes during sleep causing the airway to obstruct. "Apnea" is the Latin word
meaning "without breath." People diagnosed with sleep apnea stop breathing repeatedly during sleep, resulting in extreme exhaustion. High blood
pressure, cardiac enlargement, and cardiac arrhythmia are common, as are shortness of breath and loud snoring. In a 1993 report, the National
Commission on Sleep Disorders Research stated that as many as 18 million Americans may have signs and symptoms of sleep apnea.
How Does The DeVilbiss RPM AutoAdjust CPAP System Work?
The AutoAdjust device provides non-invasive CPAP (continuous positive air pressure) to your upper airway, acting as an air "splint" to keep the
airway passages open during sleep. This reduces and eliminates the obstructive events allowing uninterrupted sleep. The AutoAdjust CPAP is designed
to provide this therapy to you quietly and comfortably so that your sleep is restorative and refreshing. The AutoAdjust CPAP system offers automatic
adjustment of air pressure by sensing your air flow and compensating to meet your needs. AutoAdjust senses snoring and changes in breathing flow
and continually adjusts CPAP pressures in relation to these changes. AutoAdjust increases CPAP pressures when snoring or specific breath flow
patterns are detected, and decreases the CPAP pressure during periods of sleep when snoring or abnormal breath flows are not detected. The pressure
profile changes are gradual to prevent arousals of sleep architecture, but are timely to respond to respiratory events requiring pressure adjustments.
IMPORTANT PARTS (Figures 1, 2, 3)
A. Keypad/LCD Display (refer to Figure 3 for keypad symbol definition)
B. Outlet Port
C. Carrying Case
(not shown)
D. Air-Inlet Filter
E. AC Power Connector
F. DIN connector
G. Power Cord (appropriate to your wall outlet)
ACCESSORIES/REPLACEMENT ITEMS (Figure 4)
1. CPAP Humidifier
2. Humidifier Heater
®
3. DeVilbiss FlexAire™ Mask
DeVilbiss FlexAire Shallow Mask
DeVilbiss Serenity™ Mask
DeVilbiss Serenity Shallow Mask
DeVilbiss Serenity Gel Mask
DeVilbiss Serenity Gel Shallow
4. Air-Inlet Filter (4/pk)
5. Optional Fine Particle Filter
6. Oxygen Adapter
7. 6' 22 mm Tubing
8. Oximeter (optional)
(not shown)
Oximeter Y Cable
(not shown)
Oximeter Finger Clip Sensors
Ask your Sunrise Medical provider for information about other DeVilbiss mask styles and sizes.
NOTE—The standard Air-Inlet Filter is designed to filter particles larger than 3 microns in size. The AutoAdjust CPAP
must have the standard filter in place during operation. It is recommended that the filter be replaced every
6 months or if it is damaged.
NOTE—The optional Fine Particle Filter is designed to filter particles larger than 0.3 microns in size. The fine particle
filter is placed in the filter area of the AutoAdjust CPAP air intake with the standard filter placed over the fine particle filter. The optional
fine particle filter should be replaced every 30 days or if it appears dirty or damaged.
9100D
9200 Series
9353D
9353S
9352D
9352S
9352G
9352GS
8000D-602
8000D-603
7353D-601
7351D-616
9054D-693
9054D-691
Various
(not shown)
A
B
Figure 1
9
F
D
E
G
Figure 2
LCD Display
Window
ON/OFF
Up
Select
Delay
Down
Figure 3
3
1
5
6
7
4
2
Figure 4
SE-9054