Lomography Diana Instrucciones página 14

lap. In this case take a blank shot by covering the lens and then wind on.
5. My images are totally black!
Oops, that sounds a lot like you left the lens cap on!
6. The back cover doesn't slide on properly!
Try moving the rewind spool left and right so that it connects properly with
the film in the camera.
7. Can I change format many times on one roll of film?
Yes, you can! But before you slide the frame switch, make sure you have
fired the shutter release. If you have already taken a shot and wound the film
on then simply cover the lens, take a shot and then move the frame switch.
8. When I get two images on one photo from the lab one is dark and the other is too
light?
There is a reason for this and it's no one's fault! The machine at the lab
takes an average reading of the whole roll of film. If one photo is too dark,
the machine will lighten it up and as a result the image next to it can look
overexposed or washed out. You can adjust this by scanning the frames
individually to select the correct levels or you could try asking your lab to do
two scans of the same image.
9. I think I may have fallen in love with the Diana Mini!
This is a common occurrence and nothing to worry about – she is a total
heartthrob after all.
14 / ENGLISH