LG LF26G8210 Serie Manual Del Propietário página 24

en-us_main.book.book Page 24 Thursday, January 18, 2024 8:01 AM
24 INSTALLATION
2
Open both doors and check to make sure that
they close easily. If the doors do not close
easily, tilt the refrigerator slightly more to the
rear by turning both leveling legs to the left. It
may take several more turns, and be sure to
turn both leveling legs the same amount.
Door Alignment
The door alignment method may differ depending
on the model.
Refrigerator Type A
Both the left and right refrigerator doors have an
adjustable nut, located on the bottom hinge, to
raise and lower them to align properly.
If the space between the doors is uneven even
after the door bins are filled, follow the
instructions below to align the doors evenly:
Use the wrench (included with the owner's
manual) to turn the nut in the door hinge to adjust
the height. Turn the nut to the right to raise the
door or to the left to lower it.
Refrigerator Type B
Left Refrigerator Door
The left refrigerator door has an adjustable nut,
located on the bottom hinge, to raise and lower
the door for proper alignment.
If the space between the doors is uneven, follow
the instructions below to align the left door:
Use the wrench (included with the owner's
manual) to turn the nut in the door hinge to adjust
the height. Turn the nut to the right to raise the
door or to the left to lower it.
Right Refrigerator Door
The right refrigerator door does not have an
adjustable nut.
If the space between the doors is uneven, follow
the instructions below to align the right door:
1
Lift up both the inner and outer door sections
of the right door to raise them at the middle
hinge. (It may be easier to lift them with the
doors open.)
2
While the door is lifted, have an assistant
insert the snap ring on the middle hinge. The
snap ring may differ depending on the model.
• Snap ring type A
Use pliers to insert the snap ring on the
middle hinge of the inner door section as
shown. Insert additional snap rings until the
right door is aligned.
• Snap ring type B
Insert only one snap ring on the middle
hinge of the inner door section as shown.
- If a snap ring is already inserted on the
middle hinge, remove the snap ring
before inserting a new snap ring.