en-us_main.book.book Page 33 Thursday, January 18, 2024 8:01 AM
• The InstaView Display Mode automatically turns the LED light inside the InstaView Door-in-Door on and
off in cycles of 10 seconds ON and 2 minutes 50 seconds OFF.
- To activate the InstaView Display Mode:
Activate the Display Mode first. Then open all refrigerator and freezer doors and within 5 seconds
knock 3 times on the door glass.
- To deactivate the InstaView Display Mode:
Open all refrigerator and freezer doors and within 5 seconds knock 3 times on the door glass. The
refrigerator is now in Display Mode.
• To deactivate the Display Mode and InstaView Display Mode at once:
Open either refrigerator door. Press the Ice Plus button 3 times while pressing and holding the
Refrigerator button.
InstaView
This feature is only available on some models.
InstaView Door-in-Door
Knock twice on the glass to turn the LED light
inside the InstaView on or off. The LED light turns
off automatically after 10 seconds.
NOTE
• The LED light does not turn on if the right
refrigerator door is open.
• The InstaView function will not activate for two
seconds after closing the door.
• The InstaView function is disabled when the ice
dispenser is in use.
Sabbath Mode
This feature is only available on some models.
Using the Sabbath Mode
Sabbath mode is used on the Jewish Sabbath and
Holidays.
• To turn Sabbath mode on, touch the display to
activate it, then press and hold the Freezer and
Wi-Fi buttons for 3 seconds until
the display.
• To turn Sabbath mode off manually, press and
hold the Freezer and Wi-Fi buttons for 3
seconds.
NOTE
• Sabbath mode automatically turns off after 96
hours.
• Once turned on, Sabbath mode is maintained
even after a power outage.
• Selecting Sabbath mode automatically turns off
the alarm functions.
• The dispenser and InstaView are disabled in
Sabbath mode, on applicable models.
Ice and Water Dispenser
Before Using the Ice and Water
Dispenser
CAUTION
• Keep children away from the dispenser. Children
may play with or damage the controls.
• Throw away the first bin full of ice (about 140-
160 cubes) after installation. The first ice and
water dispensed may include particles or odor
from the water supply line or the water tank.
This is also necessary if the refrigerator has not
been used for a long time.
• Dispense and throw away 2.5 gallons of water
(flush for approximately 5 minutes) after
installation. Do not dispense the entire 2.5 gallon
amount continuously. Press and release the
dispenser pad for cycles of 30 seconds ON and
60 seconds OFF. This is also necessary if the
refrigerator has not been used for a long time.
OPERATION
33
appears in
sb