Publicidad
Idiomas disponibles
Idiomas disponibles
•
Never charge batteries for longer than 24 hours.
•
Li-ion batteries do not have a ''memory. ' ' Partial discharge/charge cycles will not harm the batteries'
capacity or performance.
•
The rated output capacity of a battery is measured at 77"F (25"C). Any variation in this temperature
will alter the performance of the battery, and shorten its expected life. High temperatures especially
reduce overall battery life and run time.
•
Always be sure to turn the bike power switch "OFF" after each use. If you leave the power switch in
the "ON" position, or your product has not been charged for a long period of time, the battery may
reach a stage at which it will no longer hold a charge.
INSERTING, UNLOCKING AND REMOVING THE BATTERY
•
Insert the key into the keyhole.
•
Turn the key switch to the ON position when using the E-Bike (C).
•
Turn the key switch to the OFF position when you stop using the E-Bike (B).
•
Turn the key switch to the UNLOCK position (A), the battery is then unlocked and removable.
LCD PLAYER
The bikes have an electric pedal assisted driving system. In EU countries, it is known legally as "PAS"
cycle or Pedal Assisted System. The driving assisted system consists of a driving unit, a battery, a
controller, and various electronic components (harness wires, sensors and switches). It is important
to know that when the assistant system is turned on, the driving unit engages to provide power only
while you are pedalling. The amount of power provided by the drive unit depends on your pedalling
force and the assistance mode/level you set with the handlebar control unit at any time. If you stop
pedalling, the drive assistant will disengage. In all modes/levels, the driving assisted system power
reduces progressively and cuts off as the bike reaches a speed of 25km/h (15.5mph), or sooner if you
stop pedalling. The drive assist re-engages when speed drops below 25km/h, (15.5mph) as long as the
pedals are turning.
A. UNLOCK
B. OFF
C. ON
98
Publicidad
