Descargar Imprimir esta página

Kenmore ELITE 721.80802 Instrucciones De Instalación página 4

Combinacion microondas campana

Publicidad

Idiomas disponibles

Idiomas disponibles

YOUR SAFETY FIRST
• MAKE
SURE YOU HAVE
ENOUGH
SPACE
AND SUPPORT.
- Mount the oven against a flat, vertical wall, so that it is supported by the wall. The wall should be
constructed of minimum 2" x 4" wood studding and 3/8" thick drywall or plaster/lath.
- ATTACH AT LEAST ONE of the two lag screws supporting the oven to a vertical, 2" x 4" wall stud.
- DO NOT mount the microwave oven to an island or peninsula cabinet.
- BE SURE the upper cabinet and rear wall structures are able to support 150 Ibs., plus the weight of any
items you place inside the oven or upper cabinet.
- Locate the oven away from strong draft areas, such as windows, doors, and strong heating vents.
- BE SURE you have enough space. See Figure 4 below for minimum vertical and horizontal clearance.
:Z:
WARNING
If you do not mount the oven as instructed,
you risk personal
injury and/or
property damage.
30" min. cabinet o pening width
30" min. clearance from bottom
of cabinetto cookingsurface
or countertop
(Use templates included
with installation instructions)
-Grounded
Plug
(inside
upper cabinet)
Power Supply
Cord Hole
I
Figure 4
CAUTION
• Before you begin installing the oven, PLACE A PIECE OF THE CARTON OR OTHER HEAVY MATERIAL
(a blanket) over the countertop or cooktop to protect it. Do not use a plastic cover.
Failure to protect these surfaces could result inproperty damage.

Publicidad

loading

Este manual también es adecuado para:

Elite 721.80803Elite 721.80804Elite 721.80809