TECshow NAVIGATOR 24 XL Manual De Usuario página 5

26 STEP
27 Add kill/
Rec exit
28 Blackout
29 Audio Level Fader
30 Speed holder
31 Fade fader
32 Master A B
Rear
Item Button or Fader
1
3-pin DMX output connector
2
5-pin DMX output connector
3
Polarity switch
4
MIDI Thru
5
MIDI OUT
6
MIDI In
7
Audio Input
8
Remote Input
9
DC Input
Used to go to the next step when the speed slider is set in Show Mode or in Edit
Mode.
In Add Mode, multiple scenes or Flash Buttons will be on at the same time. In Kill
Mode, pressing any Flash Button will kill any other scenes or programs. Rec Exit is
used to exit from Program or Edit Mode.
Used to kill all output, with excepetion of Full On.
Adjusts the audio sensitivity when in Audio Ttrigger mode of scenes.
Used to adjust the speed of Scenes/Chases running.
Adjust the fade-in, fade-out, and cross-fade times.
Adjust overall intensity
Function
DMX control signal
DMX control signal
Used to select DMX polarity
MIDI port for connecting to a sequencer or MIDI device
MIDI port for connecting to a sequencer or MIDI device
MIDI port for connecting to a sequencer or MIDI device
This jack accepts a line level audio input signal ranging from
100mV to 1Vpp
Blackout and Full On may be controlled by a remote control using
a standard jack
DC 12-20V, 500mAMin.
P. 5
NAVIGATOR 24XL
ENGLISH VERSION