Sears PHP960 Manual De Instrucciones página 10

Installation Instructions
CHECKLISTS
[]
D
[]
[]
PRE-TEST CHECKLIST
Remove all protective film, if present, and any
stickers.
Check to be sure that all wiring is secure and
not pinched or in contact with moving parts.
Check level of appliance.
Check that the cooktop is properly grounded.
[_ OPERATION CHECKLIST
D
D
D
Remove all items from the top of the cooktop
surface.
Turn on the power to the cooktop.
(Refer to your Owner's Manual.) Verify that all
surface burners operate properly.
Check that the circuit breaker is not tripped
nor the house fuse blown.
Check that conduit is securely connected to
the junction box.
See Owner's Manual for troubleshooting list.
NOTE TO ELECTRICIAN:
The power leads supplied with this appliance are
UL recognized for connections to larger gauge
household wiring. The insulation of these leads
is rated at temperatures much higher than the
temperature rating of household wiring. The current
carrying capacity of a conductor is governed by the
wire gauge and also the temperature rating of the
insulation around
the wire.
NOTE: ALUMINUM WIRING
, WARNING:
IMPROPER CONNECTION OF ALUMINUM
HOUSE WIRING TO THE COPPER LEADS CAN
RESULT IN A SERIOUS PROBLEM.
, Splice copper wires to aluminum wiring using
special connectors designed and UL approved
for joining copper to aluminum and follow
the manufacturer's recommended connector
procedure closely.
NOTE: Wire used, location and enclosure of splices,
etc., must conform to good wiring practice and
local codes.
10