Descargar Imprimir esta página

Blackstone 6000 Manual Del Propietário página 12

Bar y parrilla de 10'x10'

Publicidad

Idiomas disponibles

Idiomas disponibles

OWNER'S MANUAL | ASSEMBLY GUIDE
Use four (4)
[GG]
expansion bolts to anchor each post
STEP 33
foot base {
}�
B
Slide the peg of one (1) foot cover {
cover {
} for each post�
C
[GG]
× 28
Use four (4)
[ee]
bolts to attach one (1) electrical power
STEP 34
cover {
} to post 1 {
}� (Note: M3 screwdriver is included)
R
A1
Use four (4)
[ee]
bolts to attach one (1) electrical power cover {
post 2 {
}�
A2
Stick the magnetic hooks
[MM]
recommended�)
12
} into the key hole of one (1) foot
C
C
C
to the cross beams� (5 per side is
OUTDOOR STRUCTURE ANCHORING GUIDE
If your BLACKSTONE BAR & GRILL is not properly anchored,
damage could occur.
It is highly recommended for maximum safety that you mount
and secure to wood or concrete footers. This is far better and
safer than using ground stakes.
WOOD
Anchors should be drilled into
joists or reinforced blocking (not
only deck boards)�
If digging for foundation, please double check for possibility of any
underground utilities such as gas, telephone, cable or sprinkler lines�
Refer to your local building and city codes, ordinances, neigh-
borhood covenants, or height restrictions regarding this type of
structure for guidance on acceptable installation requirements�
Consider consulting a licensed contractor for assistance in the
anchoring of this product�
[ee]
× 8
[MM]
× 15
} to
R
R
WARNING
CONCRETE
Use a 1/2" drill bit (not
included) to pre-drill holes for
concrete anchors�
R
BLACKSTONEPRODUCTS.COM/SUPPORT
Model: 6000

Publicidad

loading