Blackstone 6000 Manual Del Propietário página 9

Model: 6000
Note: do NoT tighten
STEP 22
the bolts completely until all the
bolts and washers are properly
installed�
Use eight (8) [AA] bolts and eight
(8) [FF] flat washers to attach the
two (2) { } shelf braces and {
l2 K5
shelf to the { } shelf assembly�
K4
[AA] × 8
[FF] × 8
Note: do NoT tighten
STEP 24
the bolts completely until all the
bolts and washers are properly
installed�
Use two (2) [AA] bolts and two
(2) [FF] flat washers to attach
side panel 1 { } to post 8 { }�
J1 A8
Use two (2) [dd] bolts and two
(2) [FF] flat washers to attach
side panel 1 { } to post 9 { }�
J1 A9
[AA] × 2
[dd] × 2
[FF] × 4
BLACKSTONEPRODUCTS.COM/SUPPORT
}
optional left side installation optional left side installation
optional right side optional right side
installation installation
K4 K5
L2
optional left side installation (Refer optional left side installation (Refer
to left-side up, right-side up label.) to left-side up, right-side up label.)
optional right side installation optional right side installation
(Refer to left-side up, right-side (Refer to left-side up, right-side
up label.) up label.)
J1
ASSEMBLY GUIDE
Use four (4) [AA] bolts
STEP 23
and four (4) [FF] flat washers to
attach shelf brace 3 { } to the
l3
{ } shelf asssembly�
K5
[AA] × 4
[FF] × 4
Use four (4) [AA] bolts
STEP 25
and four (4) [FF] flat washers to
attach shelf 1 { } to the other {
K1
side panel�
K1
optional right side optional right side
installation installation
| OWNER'S MANUAL
optional left side installation optional left side installation
optional right side optional right side
installation installation
L3
}
J3
optional left side installation optional left side installation
[AA] × 4
[FF] × 4
09