Blackstone 6000 Manual Del Propietário página 6

OWNER'S MANUAL | ASSEMBLY GUIDE
Use four (4) [AA] bolts and four (4)
STEP 09
attach cross beam connecter 1 {
Use four (4) [AA] bolts and four (4)
beam connecter 2 { } to cross beam {
e2
[AA] × 8
[FF] × 8
E2
D2
Use four (4) [AA] bolts and four (4)
STEP 11
attach support bracket 1 { } to cross beam {
G1
Use four (4) [AA] bolts and four (4)
support bracket 1 { } to cross beam {
G2
[AA] × 8
[FF] × 8
F3
G1
A5
Use two (2) [AA] bolts and two (2)
STEP 13
one (1) roof top rib 1 { } to one (1) roof top rib 2 {
H1
Repeat with the other two (2) {
06
[FF] flat washers to
} to cross beam { }�
e1 d1
[FF] flat washers to attach cross
}�
d2
[FF] flat washers to
} and post { }�
F3 A5
[FF] flat washers to attach
} and post { }�
F1 A6
F1
G2
A6
[FF] flat washers to attach
}�
H2
} and { } roof top ribs �
H1 H2
Use four (4) [AA]
STEP 10
attach cross beam connecter {
Use four (4) [AA] bolts and four (4)
beam connecter { } to cross beam {
e1
[AA] × 8
[FF] × 8
E1
D1
Note: do NoT tighten the bolts completely until all the bolts
STEP 12
and washers are properly installed�
Use four (4) [AA] bolts and four (4)
support bracket 3 {
G3
Use four (4) [AA] bolts and four (4)
support bracket 4 {
G4
[AA] × 8
[FF] × 8
[AA] × 6
[FF] × 6
H1
bolts and four (4) [FF] flat washers to
} to cross beam { }�
e2 F1
[FF] flat washers to attach cross
}�
F3
E2
F1
[FF] flat washers to attach
} to cross beam { } and post {
F3
[FF] flat washers to attach
} to cross beam { } and post {
F1 A6
G4
G3
H2
BLACKSTONEPRODUCTS.COM/SUPPORT
Model: 6000
E1
F3
}�
A5
}�