Owner's Manual |
Fuel | 20 lb. (9 kg) Propane Tank
!
D A N G E R
An LPG cylinder not
connected for use should
NOT be stored in the
vicinity of this or any other
appliance.
• LPG cylinders should only
be stored outside and in a
cool, dry place.
• An LPG cylinder should
NOT be stored under or
near the appliance, in reach
of children, or in a building,
garage, or any other
enclosed area.
• NEVER leave an LPG
cylinder inside a vehicle
which may become over-
heated by the sun.
If the information above is
not followed exactly, a fire
causing death or serious
injury may occur.
!
D A N G E R
• NEVER fill an LPG cylinder
beyond 80% full.
An overfilled or improperly
stored cylinder is a hazard
due to possible gas release
from the safety relief valve.
This could cause intense fire
with risk of property damage,
serious injury or death.
If you see, smell or hear gas
escaping, immediately get
away from the LPG cylinder
and appliance and call fire
department.
12
blackstoneproducts.com/support
FUEL | 20 LB. (9 KG)
PROPANE TANK
!
WA R N I N G
The LPG supply cylinder
Section 01
must be disconnected when
LPG CYLINDER REQUIREMENTS
this appliance is not in use.
!
LPG CYLINDER
WA R N I N G
REQUIREMENTS
LPG is highly flammable and
The LPG Tank used with
may ignite unexpectedly
your griddle must meet the
when mixed with air.
following requirements:
!
C A U T I O N
• Date tested by a LPG supplier
within five years of use.
LPG is nontoxic, odor-
• Size: 18 x 12 in (45 x 30 cm),
less and colorless when
20 lb (9 kg).
produced. For safety and
easy detection, LPG has
• Supply system must be arranged
been given an odor similar
for vapor withdrawal.
to rotten cabbage.
• Tank must include collar to
protect LPG Tank valve.
LPG TANK VALVE
REQUIREMENTS
LPG Tank valve must have:
• Type 1 valve outlet (thread on
the outside).
• Safety relief valve.
• UL listed Overfill Protection
Device (OPD).
This OPD safety
feature is identified by a unique trian-
gular hand wheel.
LPG Tank valve
OPD hand wheel
Safety
relief
valve
Always keep new and
exchanged LPG Tanks in upright
position during use, transit or
storage.
Model 2007
Type 1 valve
outlet
Safety cap