Publicidad
Idiomas disponibles
Idiomas disponibles
1. Pair the Button
NOTE: Once paired, the remote ON/OFF button will operate the digital valve.
NOTE: The remote button will attempt to pair to the first digital valve it discovers.
Before pairing, turn OFF any other digital valves in the area.
Unthread the back cover from the button.
NOTE: The positive symbol on the battery must face out.
Insert the battery with the positive symbol facing out.
Reinstall the cover onto the back of the button.
Turn OFF the electrical supply to the digital valve for 10 seconds, then turn ON
again.
Within 30 seconds of powering ON the valve, press and hold the remote button
for 6 seconds. A light on the back of the button will flash yellow. Pairing is
successful when the light pulses green.
If the light does not turn green, move the button closer to the valve and repeat the
pairing steps.
Kohler Co.
5
1430529-2-B
Publicidad
