Injecta GEA R MT Manual De Instalación página 11

Paragraph 10 – Setting the Alarm Relay
Programming
PROG
Pump Functions
-­‐
Max flow rate
P100% -­‐
Alarm Relay
N.Open -­‐
Paragraph 11 – Flow Calibration
Programming
PROG
-­‐
-­‐
Pump Calibration
0,23 cc/stroke
Pump Calibration
Manual
-­‐
Pump Calibration
Automatic
-­‐
Paragraph 12 - Statistics
Programming
EM00136290
-­‐
+
-­‐
-­‐
Pump Calibration
+
cc/stroke 0,23
-­‐
Pump Calibration
+
P 100% 270
-­‐
-­‐
Automatic Cal.
+
S.Lenght S100%
Automatic Cal.
Start 100 strok.
Automatic Cal.
Strokes 100
-­‐
Automatic Cal.
+
ml 20
DosingPump.ir
In the absence of an alarm situation, it can be set as open
(default) or closed.
Changes can be made by pressing the
using the
to confirm and return to the main menu
The memorised cc value per strike appears in the main
menu. It can be calibrated in two different ways:
MANUAL – manually enter the cc value per strike using the
keys and confirm by pressing the
AUTOMATIC – you are requested to enter the percentage of
strokes / min and the stroke length at which you have to
make the calibration. After setting the stroke length, the
pump will automatically make 10 calibration strokes. The
pump can now execute 100 strokes that start by pressing
the key
you can insert the amount aspired by the pump
and you can confirm with the key
The data entered will be used in the calculations of the flow-
rates. While running, if varying at least 10% of the number of
strokes or 5% of the stroke length, an alarm to recalibrate
the pump will be displayed.
The main menu displays the pump operation times. By
pressing the
- Strokes = number of strokes made by the pump
- Q.ty (L) = quantity dosed by the pump in litres; this figure is
calculated on the basis of the memorised cc/stroke value
- Power = number of pump starts
- Reset = use the
otherwise (NO), then confirm by pressing the
Pressing the
menu.
rev. 1.0 EN
Operation
keys to set the new value. Press
Operation
. at the end of which through the keys
Operation
key you can access other statistics:
to reset the counters (YES) or
key will take you back to the main
key, then
key
.
key.
9