Westinghouse WKWK3058WH Instrucciones página 10

BOIL DRY CUT-OFF PROTECTION
• If the kettle is accidentally switched on empty or with insufficient water, the boil dry
feature will automatically cut off the power supply. Lift the kettle from the power
base and let it cool down before refilling it with water. Fill the kettle with water up to
the MAX marking to reset the boil dry protection.
• Avoid boiling the kettle dry to avoid damaging the appliance and shortening its
lifespan.
CAUTION
• Always unplug the appliance from the wall socket and let it cool down before
cleaning.
• Do not immerse the kettle, power base or power cord in water or other liquids.
Never rinse them under the tap or expose them to moisture.
• Never use solvents, chemical or abrasive cleaning
CLEANING AND CARE
General cleaning
1. Remove the kettle (2) from the power base (3). Empty the kettle (2) and rinse the
inside with water thoroughly.
2. Wipe the outside of the kettle (2) and the plastic parts of the power base (3) with a
soft cloth moistened with water or mild detergent. Dry completely with a soft, dry
cloth.
NOTE: Ensure that all connectors and sockets are kept dry.
Cleaning the scale filter
Depending on the hardness of the water in your area, scale present in tap water may
give your drinking water a cloudy or white appearance. The scale filter in your kettle
helps prevent scale particles from being poured into your drink.
Clean the scale filter regularly, especially when there are visible mineral deposits
and pouring is affected.
To clean the scale filter:
1. Press the lid open button (5) to open the lid.
2. Insert your fingers into the kettle and remove the scale filter .
3. Clean the scale filter (10) with a soft brush under the tap and rinse thoroughly.
4. Reattach the scale filter (10) to the kettle (2) after cleaning.
EN
10