Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION LOCATION
1. Place the appliance in a dry location on a firm, level and heat-resistant surface as
close as possible to the wall socket.
2. Do not operate the appliance on an inclined surface.
3. Keep the appliance and power cord away from naked flames and hot surfaces such
as hotplates, hobs and burners.
4.
DANGER OF ELECTROCUTION! Do not place the kettle and power base on an
enclosed surface, such as a serving tray, as this could cause water to accumulate
under the appliance and create a hazard.
5. DANGER OF ELECTROCUTION! Do not place or use the appliance near water or in
humid environments, such as a bathroom, or where water might drip or splash on it.
6.
DANGER OF ELECTROCUTION! Never store the appliance where it can fall into a
tub or sink. If the appliance falls into water or becomes wet in any way, do not touch
it. Disconnect it immediately from the power supply. Then take it to the retail outlet,
the manufacturer, or an authorized center.
7.
DANGER! KEEP OUT OF THE REACH OF BABIES AND CHILDREN Install the appliance
where it cannot be reached by children or pets.
POWER SUPPLY
1. Before first use, make sure the power voltage matches the information on the
appliance rating label.
2. Only connect the appliance to an earthed wall socket.
3. To avoid overheating, fully unwind the power cord.
4. Do not let the power cord hang over the edge of tables or countertops.
5. A short power cord should be used and arranged to reduce the risk resulting from
becoming entangled in or tripping over the power cord. Do not change the power
cord to a long power cord or use an extension cord with this product. Have a
qualified electrician install a wall socket near the appliance.
6. Arrange the power cord so that no one can catch, trip or step on it accidently.
7. Do not cover the power cord or place it under a heavy object.
8. Make sure the power cord is not crushed or bent especially where the power cord
attaches to the appliance and the plug.
9. If the power cord or plug is damaged, do not use the appliance and return it to the
manufacturer, an authorized service agent or a similarly qualified person.
10. Always unplug the appliance from the wall socket when it is not in use, before
repositioning, in the event of a thunderstorm or malfunction and prior to cleaning
and storing. Allow the kettle to cool down completely before cleaning and storing.
11. Removing the power plug is the only way to separate the appliance completely from
the power supply. Make sure the power plug is easily accessible.
7
EN
Publicidad
