- in hotels, motels and other residential environments
- guest rooms
•
The device is not intended to be operated by
external timer means or a remote control system
Warning
•
Packaging materials may not be used for playing. There is a danger of suffocation.
Delivery scope and transport inspection
As a rule, the device is delivered with the following components:
Bottle cooler
•
Examine the shipment for its completeness and for any visible damages.
•
Immediately notify the carrier, the insurance and the supplier about any
incomplete shipment or damages as a result of inadequate packaging or due to
transportation.
Unpacking
To unpack the device, remove the device out of the carton and remove the packaging
material.
Disposal of the packaging
The packaging protects the device against damages during transit. The packaging
materials are selected in accordance with environmentally compatible and recycling‐
related points of view and can therefore be recycled.
Returning the packaging back to the material loop saves raw materials and reduces the
quantities of accumulated waste. ake any packaging materials that are no longer
required to recycling collection for disposal.
•
If possible, keep the original packaging for the device for the duration of the
guarantee period of the device, in order that the device can be re‐packaged properly in
the event of a guarantee claim.
Setup location requirements:
In order to ensure the safe and trouble‐free operation of the device, the setup location
must fulfil the following prerequisites:
- The device must be set up on a firm, flat, horizontal surface with sufficient load‐bearing
capacity for the device.
-The device is not intended to be installed in a wall or a built‐in cupboard.
-Do not operate the product near hot gas or hot stove.
-Choose the setup location in such a way that children cannot reach the device.
-The device is not intended to be installed in a wall or a built‐in cupboard.
Operating Instructions