Hkoenig LVX26 Manual De Instrucciones página 7

Control panel and display
1 Change from °C to °F, as well as display of the current temperature inside the wine bottle
cooler
2 Increase the temperature
3 Display
4 Reduce the temperature
5 On/ standby button
6 LED
4.2 Operation of the bottle cooler
Connect the adapter plug with the device, then insert the plug into the socket. Press the
On / standby button. Set your desired temperature.
Place a suitable bottle (less than 90 mm in diameter) in the device. The device starts to cool
down.
LED:
The LED flashes until the set temperature is reached. After that it is constantly illuminated. As soon
as the temperature deviates by more as 3 ° C, the display flashes again.
If you press the ° C / ° F button for a long time, the temperature in the interior of the bottle
cooler is displayed for a few seconds.
The cooling power of the device depends on various factors: The ambient temperature:
The maximum achievable cooling power depends, among other things, on the outside
temperature. Rapid cooling is possible at a lower ambient temperature. If the ambient
temperature is very high, cooling may need more time.
The starting temperature of the contents of the bottle:
A pre‐cooled bottle content is immediately kept cool. Bottles with a warmer content need more
time to reach the desired drinking temperature.
Ambient temperature below 16°C or above 32°C will hinder the performance of the
appliance.
Cleaning and Maintenance
This chapter provides you with important notices with
regard to cleaning and maintaining the device. Please
observe the notices to prevent damages due to