Publicidad
Idiomas disponibles
Idiomas disponibles
Removing the packaging.
I CAUTION
Remove carton carefully, Wear gloves to protect against sharp edges.
I WARNING
Remove the protective film covering the product before putting into operation.
Supplied Part
Hood assembly and
LED lamps already installed
Grease filters
5x45 mm
5.4x75 mm
3.5x9.5 mm
4.2x8 mm
Torx 20 adapter
Tools/Materials required
• Level
• Drill
• 1
⁄
" (3.2 cm),
⁄
" (3.2 mm), and
1
1
4
8
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Jigsaw or keyhole saw
• Metal snips
• Screwdrivers:
- Flat-blade
- Phillips
- Torx 10
Parts needed
•
Home power supply cable
•
1 - ½" (12.7 mm) UL listed or CSA approved strain relief
6
LIST OF MATERIALS
Pieces
1
2
6
4
4
4
1
Parts no supplied
⁄
" (4.8 mm) drill bits
1
1 6
Supplied Part
Duct covers
8" round air transition
8x40 mm
Duct cover bracket
Mounting template
CFM Reduction Harness
•
3 UL listed wire connectors
•
1 wall or roof cap
•
Metal vent system
Pieces
2
1
2
1
1
1
Publicidad
