9. Do not expose the device to any direct or indirect
heat source.
10. Do not use this device in humid places, and do not
let it come into contact with water.
11. Warning ! If the power cable is damaged, it must
be replaced by the manufacturer, its after-sales
service or by persons of similar qualification in
order to avoid any danger. The power cable plug
must be removed from the base before cleaning
the appliance or carrying out maintenance
operations.
12. Do not use in a full room.
13. Do not subject the device to shocks or vibrations.
14. Check the mains voltage. The air conditioner is
only intended for an earthed socket outlet with a
connection voltage of 230 V (50 Hz).
15. The device must always be connected to an
earthed socket. If the power supply is not
connected to earth, you should absolutely not plug
in the device.
16. The plug must always be easily accessible when
the appliance is plugged in.
17. Before connecting the appliance, check whether:
- the connection voltage is the same as that on the
nameplate,
- the socket and the power supply are suitable for
the device,
- the cable plug is suitable for the socket.
18. Always remove the plug from the outlet when the
appliance is not in use.
EN-3