Publicidad
Idiomas disponibles
Idiomas disponibles
-
Adjust the fan speed according to your wish to reach more or less quickly the desired temperature of
the room to be cooled.
Note: In "Air conditioning" mode, the exhaust air pipe must expel the hot air to the outside.
- Once the room temperature is lower than the programmed temperature, the device automatically
switches to ventilation mode.
- The cooling function starts again as soon as the room temperature exceeds the programmed
temperature.
- The temperature range extends from 16 °C to 31 °C.
"DEHUMIDIFICATION" MODE
- When the "Dehumidification" mode is selected, the display shows
- The "Timer" function can also be selected, but not the "Sleep" mode.
Remarks :
In "Dehumidification" mode, the appliance does not need a drain hose.
Be sure to keep windows and doors closed.
Continuous drainage can be achieved by connecting a drainage hose to
the back of the unit. (Point K)
"VENTILATION" MODE
- When ventilation mode is selected, the air circulates in the room without being cooled.
- Temperature and sleep function cannot be adjusted.
- Only the timer function can be selected.
- The display shows
Note: In "Ventilation" mode, the appliance does not need a drain hose.
"TEMPERATURE ADJUSTMENT" COMMAND
- Push the button
- The temperature can only be adjusted in cooling mode.
- When you turn off the air conditioner, wait 3 minutes before turning it on again.
- Simultaneously press the 2 buttons
or Fahrenheit.
FAN SPEED CONTROL
• The device has 3 speeds in "Air conditioning" and "Ventilation" mode.
Successively press
.
or
to adjust the desired temperature.
or
SPEEDS to select the desired speed:
to toggle the temperature indication in degrees Celsius
EN-20
. The fan speed is fixed at slow.
Publicidad
