be unplugged and allow to dry for 24 hours before using it again.
· Do not introduce objects into the device.
· Unplug from outlet when not in use and before cleaning.
· The appliance must not be placed below a power socket.
· Use a soft cloth to clean the appliance. Do not use solvents or harsh chemicals. Never use direct water.
· When the appliance is not used for a long period of time, it should be unplugged and stored in its packaging. Make
sure the tank is dry and store the air cooler in dry and ventilated place.
· This appliance should never be left ON without adult supervision.
· Do not obstruct or cover the unit's inlet and outlet grilles.
· Do not touch the unit with wet or damp hands, if barefooted.
· Always use/operate the unit in a well-ventilated area.
· Do not use the unit in areas where temperature is extremely high or low (exceeding 50ºC or below 0ªC), or where it
may be exposed to direct sunlight.
·This appliance is not intended for use by persons (including children) with reduce physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
· After the first uses there could be a little odor and color change of the water in the tank.
· Change the water frequently to keep it clean.
· Use only qualified agents for repairs or services.
· Where possible, avoid using of extension cords because the extension cord may overheat and cause a risk of fire.
Never use a single extension cord to operate more than one heater.
· This appliance may be hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Always use handle
when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains
away from the appliance.
· Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
· Do not cover! WARNING: In order to avoid overheating, do not cover the heater.
· CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be
supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on
and off by the utility.
· To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid.
OPERATION
BEFORE USE:
1.Assembly main body & Front/Rear Base as belows:
A. Assembly front and
rear base
rear base
front base
EN
B. Assembly main body
and base.
put 8 pcs screws
8
C. Correct placement
hook for power cord