Pur Line RAFY 82 Manual De Instrucciones página 11

ice
water
USE
Connect the power cord to the mains supply. Press the power switch on the top cover, a beep will sound and LED
power indicator will light up, indicating that the unit is in standby mode. When the appliance is not in use, please press
the " " button on the control panel, then press the power switch on the top cover and cut off the power supply.
In standby mode, a beep sounds when you press any button on the control panel.
"FAN.ON" button - Start FAN function and change the wind speed.
A. First press "FAN.ON" button, the appliance will start running in LOW wind speed after MED wind speed for 3 seconds.
NORMAL and LOW LED lights will be on. Second press changes the wind speed from MED, HIGH, LOW cyclically.
B. If the appliance is working with HEAT function, it first stops for one minute, and then it will change into FAN mode.
C. When the appliance is reset, the last mode is selected automatically.
"HEAT.ON" button - Start he HEAT function and change between HIGH and LOW.
A. First press "HEAT.ON" button, the appliance will start from LOW heating with NORMAL mode + LOW wind speed.
Second press will change to HIGH heating with NORMAL mode + HIGH wind speed.
B. If the appliance is working with FAN function, it will be changed to LOW heating with NORMAL mode + LOW wind
speed after press " HEAT.ON"
C. When the appliance is reset, the last mode is selected automatically.
button - The appliance is in standby
A. When the appliance is working with FAN function, it will stop after press "
B. When the appliance is working with HEAT function , it stops one minute after press "
2. Draw out and fill water into water tank before using.
Please DO NOT add water above 35ºC into the water tank.
3. Ice and ICE BOX can be added optionally into the water tank.
Notes:
1) Do not add the ICE BOX when the base water tank is full, the water may overfill.
ICE PACK
2) The ICE BOX should be frozen before using.
3) The ICE BOX is sealed by supplier.
4) Do not open the ICE BOX and not put the inside gel directly into the water tank.
Otherwise, the gel may damage the water pump and the water circle system.
5) The gel is NO harmful to human.
EN
9
", but the LED light will continue on.
".