Bluetooth - Kenwood KDC-X301 Manual De Instrucciones

SiriusXM® Radio
(for
TUNE START * 2
ON: All qualified music channels in the
SmartFavorite will start playback from the
beginning of the song. ; OFF: Cancels.
SIGNAL LEVEL Shows the strength (NO SIGNAL/WEAK/GOOD/
STRONG) of the current received signal.
BUFFER USAGE Shows the memory usage (0% to 100%) for
Replay buffer.
SXM RESET YES: Resets stored channel and lock setting to
default. ; NO: Cancels.
* 1
Displayed only when [USER DEFINED] is selected.
* 2
Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later
that supports SmartFavorites.
BLUETOOTH®
/ )
BLUETOOTH — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
Connect the microphone
MIC (microphone input terminal)*
*
Pair and connect a Bluetooth device for the first time
1
Press
2
Search and select this unit model name (KDC-X3**/KDC-BT2*/KDC-MP3**BT/
KMR-D3**BT) on the Bluetooth device.
"PAIRING" "PASS XXXXXX" Device name "PRESS" "VOLUME KNOB" appears
on the display.
• For some Bluetooth devices, you may need to enter the Personal Identification
Number (PIN) code immediately after searching.
3
Press the volume knob to start pairing.
"PAIRING OK" appears when pairing is completed.
Microphone
(supplied)
Rear panel
/ : Connect to the microphone input jack. ( 34)
to turn on the unit.
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
Adjust the
microphone angle
Secure using cord clamps
(not supplied) if necessary.
ENGLISH
15