EN
Water standing
on the bottom of
the tub
Dishwasher
leaks
The dishes are
not drying
WARNING
Self-repair or non-professional repair may cause serious risks to the safety of the user
of the appliance and impact warranty.
10.3.
AVAILABILITY OF SPARE PARTS
•
Seven years after placing the last unit of the model on the market: Motor,
circulation and drain pump, heaters and heating elements, including heat pumps
(separately or bundled), piping and related equipment including all hoses, valves,
filters and aqua stops, structural and interior parts related to door assemblies
(separately or bundled), printed circuit boards, electronic displays, pressure
switches, thermostats and sensors, software and firmware including reset
software.
•
Ten years after placing the last unit of the model on the market: Door hinge and
seals, other seals, spray arms, drain filters, interior racks and plastic peripherals
such as baskets and lids.
This is normal
Overfill dispenser or
rinse aid spills
Dishwasher isn't level
Improper loading
Dishes are removed
too soon
Wrong program has
been selected.
Use of cutlery with a
low-quality coating.
A small amount of clean water around
the outlet on the tub bottom keeps the
water seal lubricated.
Be careful not to overfill the rinse aid
reservoir. Spilled rinse aid could cause
oversudsing and lead to overflowing.
Wipe away any spills with a damp cloth.
Make sure the dishwasher is level.
Use gloves if detergent residue can be
found on dishes to avoid skin irritations.
Do not empty your dishwasher
immediately after washing. Open the
door slightly so that the steam can come
out. Take out the dishes until the inside
temperature is safe to touch. Unload the
lower basket first to prevent the dropping
water from the upper basket.
With a short program, the washing
temperature is lower, decreasing cleaning
performance. Choose a program with a
long washing time.
Water drainage is more difficult with these
items. Cutlery or dishes of this type are
not suitable for washing in the dishwasher.
26