GRE AR715 Manual Especifico página 5

INSTRUCTIONS FILTRE MONOBLOC
Read this manual thoroughly before installing the filter and follow the instructions carefully during installation and use.
Keep this manual for future reference regarding the operation of this equipment.
• All electrical installations should comply with the following standard:
EN 60335-2-41, safety of household or similar electrical appliances, particular requirements for pumps.
As such with all rules pertaining to "to the construction of electrical installations within specific confines: swimming
• The electrical installation should be done by someone qualified in working with electrical equipment. This
equipment is not designed for those with physical, sensory or mental handicap or people lacking in experience,
unless done under supervision or with instructions of use from a person in charge of safety.
• The height of the sand should not exceed 2/3 of the height of the tank.
• The equipment must not be switched on while the pool is being used.
• Do not operate the equipment unless it is properly primed.
• NEVER touch the filter when it is operating if you are wet or have wet hands.
• When handling the filter or valve, DISCONNECT the power supply.
• Make sure that the ground is dry before touching the electrical equipment.
• Do not submerge the equipment or put it in a place where it could be submerged.
• Do not permit children nor adults to sit or lean on the equipment. Children should be supervised to ensure that they
do not play with the equipment.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified
person in order to avoid a hazard.
• The equipment should be connected to a voltage (see data on the pump's plate), with earth connection, protected
by a residual current device (RCD) having a rated residual operating current not exceeding 30 mA.
• It is essential that you use a multiple disconnection device with a space of at least 3 mm between surfaces to
disconnect the filter from the electrical current.
1 PACKING COMPONENTS
The equipment which you have just purchased is a special apparatus conceived and designed especially for above ground
swimming pools. As a result of its innovative design and high level of functionality, it provides you with the different components
required to filter water: filter, pump and selector valve in a single unit. The main components of this filter are as follows:
Some of the equipment's accessories (silica sand, hoses, manometers...) are not included in all models of monoblocs.
Installation and General Maintenance Manual
www.PiscinasDesmontables.es
European Low Voltage Directive 2006/95/CE,
pools and fountains", or the equivalent standard in force in each region or country.
FIG.
1
1
1
1
1
1
1
www.PiscinasDesmontables.es
- POOL PUMPS
POS.
1A
1B
1C
2
3
4
5
NAME
4 functions valve
5 functions valve
6 functions valve
Filter
Monobloc base
Conection hose valve-pump
Pump
3