BOJ T-1001 Manual De Uso página 7

English
OPERATION - TOASTING
1. Prepare the toaster as described in chapter"Before first use".
2. Put the slices of bread into the slots of toast chamber.
3.Push the toast levers down until they latch into place. All indicator light light up
and the toasting process starts.The LCD display screen of the digital tube only
shows the toasting grade. Press +/- to select the toasting grade. If no operation
occurs in 3 seconds, the toasting grade key is confirmed & with light on.
4.The selected function key stay on after 3 seconds of flashing,The remaining
function keys go out, but the stop function key and the +/- function key remain on.
5. Select the desired toasting grade using the roasting grade selector. The ad-
justment is continuous, corresponding level 1 to light toasting and level 7 to dark
toasting. The toast will be golden brown when you adjust the selector to a me-
dium toasting grade.
5. You may interrupt the toasting process at any time pushing the function key
"Stop".
6. When the selected toasting grade is achieved, the bread is ejected automatica-
lly. The appliance will be shut off.
OPERATION - WARMING
The warming function can be used to warm up bread without toasting.
1. Place the bread slices in the slots in the toasting chamber.
2. Press the toast lever down until it locks into place.
3. Then press the function key"Reheat" right away. The indicator lamp on this
function lights up.
4.The bread is warmed without being toasted.
5. You can interrupt the warming cycle any time by pressing the "Stop" function.
6. After completion of the warming cycle the bread is automatically ejected and
the indicator lamps go out. The appliance shuts off automatically.
7. Please note that you cannot set the toast darkness when using the Reheat
function.
8. Please take into account that in heating mode the toasting grade cannot be
adjusted.
The heating time is independent from the toasting grade adjustment.
- 7 -