GE AEM05 Serie Manual Del Propietario Y Instrucciones De Instalación página 4

About the controlson the air conditionermmodels with touchpads.
Features and appearance will van
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Thedisplay alwaysshowsthe room
temperatureexceptwhen settingthe
Set temperatureor the Delaytimer.
Light indicatesthe unit
is in the temperature or
delay time Set mode.
,m Auto
_, High !- Fan Only
,m Ned ,m Energg Saver
Low _ Cool
Light indicates the
delay timer is set.
Delay
O Delaytimer --
Decrease J
O o e eeo'--y
O an speed
Decrease
Temperature --
set hlcrease
and Decrease
Delay timer Increase
Auto Fan on/off
Fan speed Increase
Unit power on/off
Air ConditionerControls
Remote Control
Contro/s
O ower Pad
Turns air conditioner on _md off. _rhen
turned on, tile display will show tile room
temperature.
0 Display
Shows tile room temperature or time
remaining
on the Del W fimeL Shows the Set
mmperature while setting the mmperature in
Cool or Energy Saver modes. The Set light will
mrn on while setting.
NOTE: The display will change
to show file
room temperature after settings have been
made. To recall the Set mmpemture, press the
TempIncrease • or Decrease • pads.
O emp Increase •/Decrease • Pads
Use to set temperature when in
Coolor Energy
Savermode. The Setlight will mrn on while
setting.
O Delay fimerlncrease • (+)/Decrease • (-)
Pads
Each touch of the Increase •/Decrease •
pads on the unit or the Increase +/Decrease -
pads on the remote control will set the delay
time when using tlle
Delay
1-24hr diner (_).
The Setlight will mrn on while setting.
O an Speed Pads
Use to set the fan speed to LOW,Med, High
or Auto on the unit. NOTE: On the remote
control, use the fan speed Increase +/
Decrease - pads to set the fan speeds to LOW,
Med or High. Use the Auto pad to turn Auto
fan on.
O ode Pad
Use to set tl_eair conditioner to Cool,Energy
Saveror FanOnlymode.
0
Delay Pads
Delay ON--When the air conditioner is off, it
can be set to automatically come on in 1 to 24
hems at its previous mode and fan settings.
Delay OFF--When the air conditioner is on,
it can be set to automatically mrn offin 1 to
24 hems.
How toset:
Press file Delay 1-24hrpad on the trait or
file _ pad on file remora conuol. Each touch
of the Increase •/Decrease • pads on the
unit or the Increase+/Decrease- pads on
die remote conuol will set die timer in
1-hour intervals. The Set light will mrn on
while setting.
To review die remaining time on die Delay
1-24hrtimei; press the Delay 1-24hr pad on the
unit or the @ pad on the remote control. Use
the Increase •/Decrease • pads on the unit
or the Increase +/Decrease-pads on the
remote control
to set a new time if desired.
To cancel the timer, press tt_e Delay 1-24hr pad
until tile light on the Delay 1-24hr pad goes off:
4