Publicidad
Idiomas disponibles
Idiomas disponibles
Before
Putting ,,,!nto, Use
. Before connecting the appliance to eteotrtcal power
supply, leave II sland for about 2 hours, which will
reduce the possibility of malfunctions tn the cooling
system due to transport handling°
• Clean the appliance thoroughI_ especla;ly [n the
interior (See Cleanfng and Maintenance).
• in case the interior accessories are not correctly
placed, rearrange them as described fn chapter
"Descriplion of the Appliance',.
• If the gasket ts damaged or the deaf seal is
poor, energy consumption is substantia!_y
hlgheroTo restore efficiency, replace
the gasket.
• Always consider ]nstrucUons stated in
sections Positioning and Energy Savlng
Tips, otherwise the energy consumption Is
substantially higher.
Irnstructions
for Use
These instructions for use are intended for |he user_
They describe the appliance and correct operating
procedures for safe use.
SAVE THESE
INSTRUCTIONS:
We Care
for the
Environment
• Our products use environmentally fflendiy manner,
To Ihts end, individual packaging materiats are
ctearly marked.
• These instructions are pdnted either on recycled
paper or chlorine free bleached paper.
• When your appliance finalty wears out, please try
not to burden the environment with It; call your
nearest authorized service agent. (See Disposing
of Worn Oul Appliance)
Tips for Energy
Savings
• Try hal to open the door Ice often, especially when
the weather is hot and humid. Onc8 you open the
door, o_ose _tas soon as possible. This is especlally
important if you have an upright model.
• Every now and then check it the apptianc_) is
sufficiently ventilated (adequate air circulation
behtnd the appliance).
• Set the thermostat from higher to lower seltings as
soon as posslbte (depends on hew loaded the
appliance is, ambient temperatures elc)o
• Before loading the appliance with packages of fresh
foods, make sure that they are cooled to
ambient temperalura. (excluding soups)
,, Ice and frost layers increase energy consumption,
so ciean the appltance as soon as the frost tayer
is 3-5 mm thick.
Publicidad
