GE 18 Serie Manual Del Propietario E Instalación página 18

Installation Instructions
REVERSmNG THE DOOR SW NG
IMPORTANT NOTES
_'_ hen reversing the door swing:
• Read the instructions all the way through before
starting.
• Handle parts careflfllv to axoid scratching, I)aint
• Set screws down
b_ their
related parts to a',oid usino,
them in the wrong places.
• Proxide a non-scratching work surtace fin,
the doo_.
IMPORTANT: Once you begin, do not Inoxe the
cabinet until doo>swing reversal is completed.
These inst_ uctions are for changing the hinges from
the right side to the left side--if _ou e',er want to change
the hinges back to the right side, follow these same
instructions and rexe_e all references to left and right.
Unplug the refrigerator from its electrical outlet.
Empty all door shelves, including the dairy
compartment,
TOOLS YOU WILL NEED
Phillipsscrewdriver
Masking tape
3/8" Headsocketdriver
(a 6-pointsocket is
recommended)
Puttyknife or
thin-bladescrewdriver
T20 or T25 Torx _
driver,whicheveryour
modelrequires
[] REMOVE THE FREEZER DOOR
Tape the door shut with masking tape.
Remo_e the hinge co_er on top of the fl'eezer door
(on some models).
Remoxe the two To_x ''_ screws, then lift the hinoe
straight up to flee the hinge pin fl'om the socket in
the top of the door
Remove the tape and tilt the door away from the
cabinet. I,ifl it off the center hinge pin.
Set the door on a non-scratching surtace with
the inside up.
18