Publicidad
4.
Select the zone number you want to configure:
5.
Check the Serial Number is blank or zero. An existing
number indicates a wireless device is currently
programmed for this zone number.
6.
Click Learn:
"Learn Mode Active" will appear. Trigger your wireless
7.
device. Refer to the installation manual of the wireless
device if you need assistance.
4 / 56
"New Device Found" will appear and the Serial Number
8.
field will contain your wireless device details:
9.
Program other settings on this screen as required.
10. Click Save.
Adding Keyfobs
1.
Log in to the xGen control panel.
2.
Click Settings.
3.
Select Keyfobs in the drop down menu.
P/N 466-2948 • REV D • ISS 15MAR21
Publicidad
