Publicidad
9.
If the user desires automation control when the Scene
button (lightbulb icon) is pressed, select the Scene to
trigger from the drop-down menu:
Removing Wireless Devices
1.
Log in to the xGen control panel.
2.
Click Settings.
3.
Select Zones in the drop-down menu.
6 / 56
4.
Select the zone number you want to remove:
5.
Click Remove then OK to confirm.
6.
Click Save.
Completing Installation
1.
Re-install the front rubber tamper button if it was removed.
2.
Re-install the front plastic housing and tighten the bottom
screw.
Specifications
Compatibility
Wireless operating frequency
Maximum power output
Required Power
Current Draw
Supported Wireless Devices
Dimensions (H × W × D)
Weight
Operating temperature
Storage temperature
Relative humidity
Regulatory information
Manufacturer
PLACED ON THE MARKET BY:
Carrier Fire & Security Americas Corporation Inc.
13995 Pasteur Blvd
Palm Beach Gardens, FL 33418, USA
AUTHORIZED EU REPRESENTATIVE:
Carrier Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
xGen control panels
433.65 MHz
1 dBm
12.0 VDC (provided by panel)
50 mA maximum
433-63 All devices, 433-80plus PIR
and Door Window Switch
155 mm x 95 mm x 68 mm
160 g
0° to 49°C (32° to 120°F)
−34° to 60°C (−30° to 120°F)
up to 90% noncondensing
P/N 466-2948 • REV D • ISS 15MAR21
Publicidad
