Publicidad
Idiomas disponibles
Idiomas disponibles
PROGRAMMED
EDIT
RECORDING
The Programmed
edit function enables CD recording while
checking the remaining time on each side of the tape as the
tracks are programmed.
1
2
3
4
5
Insert the tape into deck 1.
5
4,5
3,7,8,9
Insert the tape-with the side to be recorded first facing out
from the unit. Press the TAPE button, and wind up the tape
with the +<
button,
Press the CD button on the main unit and load
the disc (s).
Press
the
EDIT/CHECK
button
twice
while
pressing the SHIFT button on the remote control.
PRGM is displayed.
Press the numeric buttons on the remote control
to designate
the tape length.
10 to 99 minutes can be specified.
Example: When using a 60-minute tape,
press
the 6 and O
buttons.
Maximum recording
Tape length
time for side A
Tape side A (front side)
Press one of the DISC DIRECT PLAY buttons to
select a disc and press the numeric
buttons to
program a track.
Example: To select the 10th track of disc 2, press DISC
DIRECT PLAY 2 and the numeric buttons + 10 and O.
Remaining
6
7
8
9
Repeat step 5 for the rest of the tracks for side
A.
A track whose playing time is longer than the remaining time
cannot be programmed.
Press the EDIT/CHECK button while pressing the
SHIFT button to select side B and program the
tracks for side B.
After confirming B on the display, repeat step 5.
Press the EDIT/CHECK
button while pressing the
SHIFT button to select side A and press the
button on deck 1 to start recording.
CD play and recording of edited tracks for the first side start
simultaneously. When the end of the tape is reached, deck
1 enters the recording stop mode. After entering the recording
stop mode, go to step 9.
Press the EDIT/CHECK
while pressing the SHIFT
button on the remote control for recording
of
the second side.
After confirming B on the display, go to step 10.
70
Turn over the tape in deck 1 and press the
button.
Recording starts.
To stop recording
Press the
WA
button on deck 1. Recording and CD play stop
simultaneously.
To check the order of the programmed
track numbers
Before recording,
press
the EDIT/CHECK button while pressing
the SHIFT button to select side A or B, and press the ++
or
>
button repeatedly.
Program
Disc
Programmed
track
number
number
numbers
Tape side
Track number
To change the program of each side
Press the EDIT/CHECK button while pressing the SHIFT button
to select side A or B, and press the
CLEAR button to clear the
program of the selected side. Then program tracks again.
To clear the edit program
Press the
button twice so that Al EDIT disappears on the
display.
The edit function cannot be used with discs containing 31 tracks
or more.
Recording is inhibited if the erasure prevention tab on either
side of the tape is broken off.
Total number of
programmed tracks
1 I
ENGLISH
Publicidad
