Publicidad
PRESETTING STATIONS + EI
The unit can store a total of 32 preset stations.
When a station
is stored,
a preset
number
is assigned
to the station.
Use the
preset number to tune into a preset station directly.
1
2
3
Press the TUNEFUBAND button to select a band,
and press the W
DOWN or UP M
button to
select a station.
Press the II SET button to store the station.
A station is assigned
to a preset number, beginning
from 1 in
consecutive
order for each band.
DISPLAY
@
The frequency
@ The preset number
@ The preset numbers
The selected
preset number flashes.
Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
have already
been stored for all the bands.
m
Each band can only store a maximum
of 16 preset stations.
PRESET NUMBER TUNING + EI
Use the remote control to select the preset number directly.
7 Press the BAND button to select a band.
2 Press the numeric
buttons
to select a preset
number.
Example:
To select preset number
10, press the +10 and O buttons.
Selecting a preset number on the main unit
Press the TUNER/BAND
button to select a band.
Then, press
the +*
DIR/PRESET
button repeatedly.
Each time the button
is pressed,
the next higher
number
is
selected.
To clear a
preset station
Select
the preset
number
of the station
to be cleared.
Then,
press the
CLEAR button, and press the II SET button within 4
seconds.
The preset numbers
of all other stations
in the band with higher
numbers
are also decreased
by one.
Publicidad
