Publicidad
A
H
BASIC OPERATIONS
INSERTING TAPES
You can select a reverse mode to play back one or both sides.
Use normal (type I), Crop (type II) or metal (type IV) tapes for
playback.
Press the TAPE button and press the A EJECT mark
to open the cassette holder. -+
Insert a tape with the exposed
side down and with the side to be
played first facing out from the unit.
Push the cassette
holder to
close.
To
select
a reverse
mode
+
Each time the TAPE/REV
MODE button
is
pressed,
the reverse
mode changes.
To play one side only, turn on =.
To play from front side to back side once only, turn on 3.
To play both sides repeatedly,
turn on (:).
PLAYING BACK A TAPE
Insert a tape,
Press the <-
button to start play. -+
DISPLAY
@
Playback
side of the tape
b:
The side facing out from the unit (the front side) is being
played.
+:
The side facing in toward the unit (the back side) is being
played.
@ Tape counter
indicates
the tape running length.
To stop play, press the
button.
To pause play, press the II button.
To resume play, press again.
To change
the playback
side,
press the <b
DIR/PRESET
button in play or pause mode.
To fast forward
or rewind, press the 44
or -
button in stop
mode.
Then press the
button to stop the tape.
To start play when the power
is off (Direct
Play Function)
Press the TAPE button. The power is turned on and play of the
inserted
tape begins.
To set the tape counter
to 0000
Press the 9 CLEAR button in stop mode.
The counter
is also set to 0000 when the cassette
holder
is
opened.
About cassette tapes
c
To prevent
accidental
erasure,
break off the plastic tabs on
the cassette tape after recording with a screwdriver
or other
pointed tool. +
@Side
AJ @ Tab for side A
To record
on the tape again,
cover
the tab openings
with
cellophane
tape, etc.
120-minute
or longer
tapes
are extremely
thin and easily
deformed
or damaged.
They are not recommended.
Take up any slack in the tape with a pencil or similar tool before
use.
Slack tape may break or jam in the mechanism.
+
28
Publicidad
