Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Back Home mode
-
Press the Back Home button on the robot vacuum cleaner or from the app to send the robot
vacuum cleaner to the charging base.
-
This mode can be activated during any cleaning cycle.
-
The robot vacuum cleaner will take the shortest route back to the charging base thanks to
its map-memorisation feature and the smart back-home function.
-
Upon completing a cleaning cycle or when the battery is low, thanks to its Total Surface
2.0 technology, the robot vacuum cleaner will automatically return to the charging base to
avoid running out of battery. Once the robot has recharged, it will resume cleaning from
the point it has stopped.
Note:
If there is no good access to the charging base, the robot vacuum cleaner will not be able to
return to it. If this happens, manually place it in the self-emptying base.
Functions
Pause:
While the robot vacuum cleaner is running, press the Start/Pause button on the robot vacuum
cleaner or select it in the app to pause the cleaning process. Press the Start/Pause button on
the robot vacuum cleaner or on the app to resume the cleaning process.
Standby:
The robot vacuum cleaner will automatically enter standby mode after 10 minutes of inactivity.
Press the Start/Pause button on the robot vacuum cleaner or in the app to activate it again.
Cleaning modes
-
The robot vacuum cleaner includes different modes and functions that can be toggled
from the app.
-
In addition, in every one of the cleaning modes on the app, you will be able to select the
Turbo mode on carpets, which activates the maximum suction power when the robot
vacuum cleaner detects a carpet.
-
Please note that the robot will stop the rotary movement of the mops when it detects
the carpet, but if the mops are wet it may dampen the carpet. To avoid this, from the
application you can indicate restricted areas in the areas where the carpets are in your
home, or directly from the application indicate that the robot does not climb on the carpet
when it detects it.
Edge mode:
-
When this mode is selected, the robot vacuum cleaner will clean along walls and around
furniture (e.g., table or chair legs).
56
CONGA 11090 SPIN REVOLUTION HOME&WASH
-
The robot will return to the charging base to clean the mops and moisten them again to
continue cleaning, according to the frequency selected in the application.
-
Press the edge cleaning mode in the app.
Spiral mode:
-
When this mode is enabled, the robot vacuum cleaner will thoroughly clean a specific area.
It will start cleaning at a specific spot and will move outwards in a spiral motion, and it will
return to the starting spot in an inwards spiral motion again.
-
When it finishes and returns to the starting spot, the robot vacuum cleaner will return to
the charging base directly.
-
Before using this mode, place it in the spot you wish to clean.
-
Select the spiral cleaning mode on the app.
Manual Mode:
The robot vacuum cleaner can be moved manually by selecting manual mode in the application
and using the arrow keys.
Back Home mode:
Press the Back Home button on the robot vacuum cleaner or select the option in the app to
send the bobot vacuum cleaner to the charging base in any cleaning mode.
Smart Area Mode:
-
Once the home's map has been saved, select this mode for the robot to clean a specific area
in zigzag motion. The robot vacuum cleaner will clean the selected area and then return
directly to the charging base. You can select more than one area on the map at a time. The
robot vacuum cleaner will only clean the area selected on the map. It will therefore go to
the selected area and return to the base without vacuuming.
-
To activate this mode, select the Smart Area option on the app.
Spot mode:
-
Select this mode if you want to thoroughly clean a specific point in the map, making the
most of the robot vacuum cleaner's maximum power. The robot vacuum cleaner will clean
an area of 1.6m x 1.6m in a zigzag pattern and return directly to the charging base once
finished. The robot vacuum cleaner will only clean the area selected on the map. It will
therefore go to the selected area and return to the base without vacuuming.
-
To activate this mode, select the spot cleaning option on the app.
Restricted Area mode:
Mark out specific areas on the map that you do not want the robot vacuum cleaner to clean.
The robot vacuum cleaner will detect the defined area and will not clean it.
You can select more than one restricted area on the map.
ENGLISH
CONGA 11090 SPIN REVOLUTION HOME&WASH
57
Publicidad
