cecotec IRONHERO 3200 FORCE ANODIZED Manual De Instrucciones página 38

ENGLISH
Anti-drip
This system controls the water flow emitted to the soleplate at all times. Above a certain
temperature, the anti-drip function cuts off the water flow and prevents the soleplate from
dripping water onto the garments.
During the use of the iron, the anti-drip system may emit a loud clicking noise, especially during
heating or cooling. This is perfectly normal and indicates that the system is working properly.
Built-in anti-scale system
The anti-limescale system is designed to reduce limescale build-up that occurs during steam
ironing. This will extend the life of your iron. However, please note that the anti-scale system
will not completely stop the natural limescale build-up process.
Auto switch-off
When the iron is stable, for protection and to save energy, it will automatically switch off. In
vertical mode the iron stabilises in 8 minutes; in horizontal mode in 30 seconds.
Type of fabric and position of the temperature/thermostat knob:
Caution:
Label instructions
4. CLEANING AND MAINTENANCE
After each use
1. Turn off and unplug the iron.
2. Empty the tank immediately after use. Do not store the iron with water in it.
3. Wait until the iron has cooled down before storing it, and always place it on the base to
protect the soleplate from scratches, corrosion, or stains.
4. After allowing the iron to cool down completely, store it upright in a safe place.
38
IRONHERO 3200 FORCE ANODIZED
Please note that the label indicates that this item cannot be ironed.
Type of fabric
Nylon
Silk
Wool
Cotton
Linen
Thermostat knob
Min.
Max.