Descargar Imprimir esta página

cecotec IRONHERO 3200 FORCE ANODIZED Manual De Instrucciones página 39

Plancha horizontal

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 29
Outer iron surface
After unplugging and allowing the iron to cool down, simply wipe it with a damp cloth and, if
necessary, use a mild detergent.
Warning: do not use abrasive cleaner agents.
Soleplate
Starch and other types of residues may be easily removed from the soleplate with a damp
-
cloth.
To avoid scratching the finish, never use a metal scouring pad to clean the soleplate or
-
place the iron on a rough surface. If synthetics are ironed at too high a temperature, not
only is the fabric often damaged, but the soleplate of the iron is often covered with the
melted residue of the synthetic fabric. The best way to remove synthetic residues from the
soleplate is to heat up the iron and iron an old cotton cloth.
WARNING: never use iron cleaners as they may damage the working parts of the iron.
Self-cleaning
Use the self-cleaning function once every two weeks. If the water in your area is very
-
chalky, you should use the self-cleaning function more frequently.
Make sure the iron is unplugged, turn the steam switch to the "O" position and fill the water
-
tank to the MAX position. Do not put vinegar or other liquid solutions in the water tank.
Select the maximum ironing temperature and plug the appliance into the mains socket.
-
Unplug the iron when the power indicator light has gone out, rest the iron on a base and
press and hold the self-cleaning button while moving the iron back and forth. Steam and
boiling water will come out of the soleplate of the iron, then any impurities (if any) will be
expelled.
Release the self-cleaning button as soon as all the water in the tank has been used up.
-
Repeat the self-cleaning process if the iron still contains many impurities.
-
After the self-cleaning process, plug the iron into the socket and allow it to heat up so that
-
the soleplate dries.
Unplug the iron when it has reached the set ironing temperature. After this, gently move
-
the iron over a piece of used cloth to remove any water stains that may have formed on the
soleplate and allow the iron to cool down before storing it.
5. TROUBLESHOOTING
IRONHERO 3200 FORCE ANODIZED
ENGLISH
39

Publicidad

loading

Este manual también es adecuado para:

01872