Publicidad
Idiomas disponibles
Idiomas disponibles
NIGHT MODE
This feature is useful during the night as it reduces the unit's power consumption.
You can only select this mode from the remote control:
•
Select Cooling or Heating mode as described above.
•
Press the button
, the corresponding symbol is displayed on the
screen.
•
The unit will operate in the previously selected mode.
•
When you choose Night mode, the screen brightness is reduced, as is
the fan speed.
Night mode maintains the room at an optimal temperature without excessive fluctuations in temperature
or humidity. The fan speed is always low while the temperature and humidity in the room change
gradually to ensure optimal comfort.
In COOLING mode, the selected temperature increases by 1°C per hour over a period of two hours. This
new temperature is maintained for the next six hours. Then the unit turns off.
In HEATING mode, the selected temperature decreases by 1°C per hour over a period of three hours.
This new temperature is maintained for the next five hours. Then the unit turns off.
NIGHT mode can be cancelled at any time during use by pressing the buttons
The NIGHT function cannot be selected in FAN or DEHUMIDIFIER mode.
OSCILLATION MODE
You can only select this mode from the remote control:
•
Select the operating mode (cooling, dehumidification, fan) as described above.
•
Then press the button
to start or deactivate automatic oscillation.
PROGRAMMING
The timer can be used to delay the unit starting or stopping. This enables energy savings while optimizing
the periods of use.
TO PROGRAMME STARTING
To carry out programming from the control panel:
•
Turn the appliance on.
•
Choose the mode you want, such as COOLING at 24 °C and maximum fan speed.
•
Switch the appliance off.
•
Press the button
, the corresponding light on the control panel and the hour number will start
flashing on the display.
34
•
Press the button
the unit comes on.
•
The setting is stored in the memory after a few seconds. The timer indicator comes on. Once the
time has elapsed, the unit will turn on.
•
To cancel the programme, press on the button
To carry out programming using the remote control:
•
Turn the appliance on.
•
Choose the mode you want, such as COOLING at 24 °C and maximum fan speed.
•
Switch the appliance off.
•
Press twice on the button
symbols
•
Press the buttons
displayed.
•
Press the button
and
•
To cancel the programme, press on the button
. The symbol
,
or
.
PROGRAMMING STOPPING
To carry out programming from the control panel:
•
While the unit is running, press the button
hour number will start flashing on the display.
•
Press the button
the unit stops.
•
The setting is stored in the memory after a few seconds. The timer indicator comes on. Once the
time has elapsed, the unit will turn off.
•
To cancel the programme, press on the button
To carry out programming using the remote control:
•
While the unit is running, press the button
and the symbols
•
Press the buttons
displayed.
•
Press the button
and
•
To cancel the programme, press on the button
. The symbol
to select the number of hours (between 1 and 24) that should elapse before
again or the button
. The screen displays hours and the
and
flash on the remote control screen.
and
until the desired number of hours is
again. The timer is then activated: the symbols
remain displayed on the remote control screen.
again or the button
disappears from the screen.
, the corresponding light on the control panel and the
to select the number of hours (between 1 and 24) that should elapse before
again or the button
. The screen displays hours
and
flash on the screen.
and
until the desired number of hours is
again. The timer is then activated: the symbols
remain displayed on the remote control screen.
again or the button
disappears from the screen.
. The timer indicator goes off.
. The timer indicator goes off.
35
Publicidad
