Invacare Aquatec 90 Ergo Manual Del Usuario página 3

Contraindications
There are no contraindications known when using the
product as intended. For the maximum user weight of the
product, see 7 Technical Data, page 3 .
3.2 Scope of Delivery
The scope of delivery is shown in figures 1 & 2.
4 Setup
1. Install the lid (if included) by clicking the lid into the
holders (Fig. 3).
2. Flip up your toilet seat (Fig. 4). (Alternative: Remove
toilet seat.)
3. Clean and dry the surface of the toilet bowl.
4. Place the raised toilet seat in the middle of the toilet
bowl (Fig. 4 & 5).
WARNING!
Risk of Falling!
If the raised toilet seat is not placed in the
middle of the toilet bowl, tipping over can
cause injury or damage.
– Make sure that the raised toilet seat is
placed in the middle of the toilet bowl, refer
to Fig. 5 (label on front of the product).
– Ensure that both the raised toilet seat and
toilet bowl surface are dry. Do not place
the raised toilet seat on the toilet bowl if
either surface is wet (Fig. 4).
5 Maintenance
5.1 General Maintenance Information
This product is maintenance-free, provided that the cleaning
and disinfection instructions are adhered to.
5.2 Cleaning and Disinfection
General Safety Information
CAUTION!
Risk of Contamination
– Take precautions for yourself and use
appropriate protective equipment.
NOTICE!
Wrong fluids or methods can harm or damage
the product.
– All cleaning agents and disinfectants used must
be effective, compatible with one another and
must protect the materials they are used to
clean.
– Never use corrosive fluids (alkalines, acid etc.)
or abrasive cleaning agents. We recommend
an ordinary household cleaning agent such as
dishwashing liquid, if not specified otherwise in
the cleaning instructions.
– Never use a solvent (cellulose thinner, acetone
etc.) that changes the structure of the plastic
or dissolves the attached labels.
– Always make sure that the product is completely
dried before taking it into use again.
For cleaning and disinfection in clinical or long-term
care environments, follow your in-house procedures.
1649825-C
Cleaning Intervals
NOTICE!
Regular cleaning and disinfection enhance smooth
operation, increases the service life and prevents
contamination.
Clean and disinfect the product:
– regularly while in use,
– before and after any service procedure,
– when it has been in contact with any body
fluids,
– before using it for a new user.
Cleaning Instructions
NOTICE!
Maximum cleaning temperature:
– 60 °C by hand
– 85 °C for 3 minutes by automatic washing
systems
1. Clean the product by wiping down all generally accessible
surfaces.
2. Dry the parts with a cloth.
Disinfection Instructions
Method: Follow the application notes for the used
disinfectant and wipe-disinfect all accessible surfaces.
Disinfectant: Ordinary household disinfectant.
Drying: Allow the product to air-dry.
6 After Use
6.1 Reconditioning
This product is suitable for reuse. To recondition the product
for a new user, carry out the following actions:
• Inspection
• Cleaning and disinfection
For detailed information, see 5 Maintenance, page 3 .
Make sure that the user manual is handed over with the
product.
6.2 Disposal
Disassemble the product and its components, so the different
materials can be separated and recycled individually.
The disposal and recycling of used products and packaging
must comply with the laws and regulations for waste handling
in each country. Contact your local waste management
company for information.
7 Technical Data
7.1 Weights and Materials
Weights
Weight model without lid
Weight model with lid
Maximum user weight
Materials
Corpus / Lid
All product components are corrosion resistant and do not
contain natural rubber latex.
1.2 kg
1.6 kg
225 kg
PP
3