THOMSON ANT1703BK Instrucciones De Uso página 4

KEB Operating instruction
Controls and Displays
ain receiver
Base
. Blank cover
. Headphone holder/Wall bracket
. Control dial
. Status LED
. Telescopes
. Antenna cable
. Power cable
Thank you for choosing a Thomson product.
Take your time and read the following instructions and
information completely. Please Keep these instructions
in a safe place for future reference. If you sell the device,
please pass these operating instructions on to the new
owner.
1. Explanation of Warning Symbols and Notes
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
This symbol is used to indicate additional information or
important notes.
N
. Package Contents
e 1 x ANT1703BK indoor antenna
e 1 x wall bracket
• 1 x power supply unit, 6 V 100 mA
e 1 x these operating instructions
w
. Safety Notes
he product is intended for private, non-commercial use
only.
Use the product for its intended purpose only.
e Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
* Keep this product, as all electrical products, out of the
reach of children!
* Do not drop the product and do not expose it to any
major shocks.
+ Do not operate the product outside the power limits
given in the specifications.
* Do not use the product in areas where the use of
electronic devices is not permitted.
* Only connect the product to a socket that has been
approved for the device. The electrical socket must
always be easily accessible.
.
Disconnect the product from the network using the
power button — if this is not available, unplug the power
cord from the socket.
Lay all cables so that they do not pose a tripping hazard.
Do not bend or crush the cable.
Keep the packaging material out of the reach of children
due to the risk of suffocation.
Dispose of packaging material immediately according to
ocally applicable regulations.
Do not modify the product in any way. Doing so voids
he warranty.
Warning
* Do not use the product if the power supply unit or
power cable is damaged.
* Do not attempt to service or repair the product
yourself. Leave any and all service work to qualified
experts.
* Do not open the device or continue to operate it if it
becomes damaged.
4. Installation
* Connect the main receiver (1) to the stand (2) until you
hear them lock into place.
Note
Please note that once the main receiver (1) and the
stand (2) have been assembled, they can no longer be
separated without specialist assistance.
* Attach the headphone holder/wall bracket (4) to the
main receiver (1).
• If you don't intend to mount it on the wall or use the
antenna as a headphone holder, you can mount the
blank cover (3) instead.
00131918man cs de el en es fi fr hu it nl pl pt ro ru sk sv tr.ind
29.11.13 12:21