Silvercrest SWGF 2400 A1 Instrucciones De Uso página 23

1) Lift the kettle off of the base when filling it!
2) Press the unlocking button
NOTE
► When filling it, hold the kettle upright. This is the only way to read the
markings on the scale
3) Fill the kettle no further than the MAX mark, so that boiling water cannot spill out.
4) First close the lid, then place the kettle on the base
on the base
5) Now insert the plug into the mains power socket.
6) Push the ON/OFF switch
WARNING - RISK OF INJURY!
► For safety reasons you should not open the lid when the water is boiling or
extremely hot. There is a risk of scalding.
7) During use, the colour of the light ring
in the kettle.
less than 50°C
approx. 50–60°C
approx. 61–75°C
approx. 76–90°C
approx. 91°C up until automatic
shut-off
8) As soon as the water is boiling, the appliance will switch itself off, the
ON/OFF switch
INFORMATION
► This appliance is fitted with an overheating protector: if the appliance is
switched on accidentally, without any water in the kettle, the appliance
automatically switches itself off.
If, for example due to a non-closed lid the appliance boils dry, the appliance
switches off automatically.
In such cases first allow the appliance to cool down before using it again.
GB │ IE
■ 20 │
and open the lid.
correctly.
.
downwards (position "I") so that it engages.
Temperature
clicks upwards and the light goes out.
, so that it sits securely
indicates the temperature of the water
Colour
green
light blue
dark blue
purple
red
SWGF 2400 A1