Chasing PING 360 Manual De Usuario página 3

CHASING PING 360 SONAR
KIT (M2 PRO MAX)
EN
User Manual
V1.0
CHASING PING 360 sonar kit, consisting of BlueRobotics Ping360 and mounting
kit customized and developed by CHASING Innovation, can be mounted on
CHASING M2 PRO and CHASING M2 PRO MAX for use. Ping360 main body is a
mechanical scanning sonar used for navigation and imaging, with a range of 50m
(165 feet), a depth level of 300m (984 feet), and open source software interface.
1
3
2
5
6
01
1
1. Ping360 main body
2. Tether module
4
3. Connection cable joint
4. Screw
5. Mounting support (M2 PRO MAX)
6. CHASING quick release holder
Mounting and connection
1. Fix the mounting support (M2 PRO MAX) and CHASING PING 360 (including
tether module) by screws.
2. Fix the CHASING quick release holder above / below the ROV, slide the entire
unit assembled in step 1 from the direction of the platform arrow onto the
holder, insert the other end of the connection cable into the ethernet of the
ROV, and tighten screws.
EN
02