Chasing PING 360 Manual De Usuario página 6

Precaution
1. Details of download of BlueRobotics Ping360 imaging sonar related software
EN
and sonar specification parameters are available on the BlueRobotics official
website: https://bluerobotics.com/store/sensors-sonars-cameras/so-
nar/ping360-sonar-r1-rp/
2. Please mount and connect the imaging sonar when the ROV is powered off,
and make sure that the connection cable plug is well plugged and nuts are
tightened before launching for use;
3. Check the machine for damage or missing of components before use; if
damage or missing of components occurs, please replace them in a timely
manner;
4. Check and keep the machine body interface dry and clean before use. Salt and
moisture may corrode the port. In case of water droplet entering the port,
please rinse the socket with fresh water, and absorb the water in the socket
with paper towel or cotton ball.
5. When using, it is necessary to observe the orientation of the CHASING Ping360
sonar kit in the water to avoid being blocked by the ROV, which may affect the
transmission of acoustic signals.
6. If users tend to assemble and disassemble the sonar by themselves, they shall
operate in strictly accordance with the User Manual. Damage caused by
non-standard assembly and disassembly is not covered by the warranty.
Packing List
CHASING PING 360 SONAR KIT
(M2 PRO MAX)
CHASING Ping360 (including
tether module) *1
Datagram *1
Accessory mounting
platform assembly *1
07
M3*25 cross
12.5*1.8 O-ring *2
recessed pan head
screw *4
CHASING Ping360 sonar
Screw *1
mounting sonar *1
10.82*1.78 O-ring *1
CHASING PING 360 M2 PRO MAX
Self-assembly kit (excluding sonar)
Tether module
12.5*1.8 O-ring *2
assembly *1
Datagram *1 CHASING Ping360 sonar
mounting sonar *1
Accessory mounting 10.82*1.78 O-ring *1
platform assembly *1
Support
For any questions or technical problems, please contact us by the Email of
CHASING After-Sales Department or the customer service hotline on the official
website.After-sales Service Hotline: 400-667-6959
After-sales Email: support01@chasing-innovation.com--Europe
support02@chasing-inno vation.com--Asia & Oceania
support03@chasing-inno vation.com--North and South Americas & Africa
This Manual is subject to updating without prior notice.
The latest version is available on CHASING official
website: https://www.chasing.com
EN
M3*25 cross recessed
pan head screw *8
Screw *1 Sonar reform
package (gift) *1
PING360 connection cable *1
08