Sears CRAFTSMAN 358.797030 Manual Del Operador página 4

workingorder,or the engine mustbe
constructed, e quipped,and maintained
for the preventionoffire. Check with
yourstate or localauthorities for regu-
lationspertainingto these require-
ments.Failureto follow these require-
mentsis a violationof the law. This unit
isnot factory equippedwitha spark ar-
restor,however,a sparkarrestoris
availableas an optionalpart. If a spark
arrestoris requiredin yourarea, con-
tact Sears Service for the correctkiL
The spark arrestor,blowertubes,and
nozzlesmustbe assembledto unitto
be in full compliancewith regulations.
SPECIAL NOTICE: Exposureto vibra-
tionsthroughprolongeduse of gaso-
linepoweredhand toolscouldcause
bloodvessel or nerve damagein the
fingers, hands, and jointsofpeople
proneto circulationdisorders or abnor-
mal swelling.Prolongeduse incold
weather has been linkedto bloodves-
sel damage in otherwisehealthy
people. If symptomsoccursuch as
numbness,pain, lossof strength,
changein skin coloror texture,or loss
of feeling in the fingers,hands,or
joints,discontinue the useof this tool
and seek medicalattention.An
antivibraUon systemdoes not guaran-
tee the avoidance ofthese problems.
Users who operate powertoolson a
continualand regularbasis mustmoni-
tor closelytheirphysicalconditionand
the conditionof this tool.
CARTON CONTENTS
Checkcartoncontentsagainstthe fol-
lowing lisL
Model 358.797030
• Blower
• Blowerfube
• 2-Cycle EngineOil
NOTE; It is normalfor the fuel filterto
rattlein the emptyfuel tank.
ASSEMBLY
WARNING: If receivedassembled,
repeat all stepsto ensureyourunitis
properlyassembledand all fasteners
are secure.
• No toolsare requiredfor assembly.
BLOWER TUBE ASSEMBLY
, Alignthe rib on the blowertube with
the groove in the bloweroutlet;slide
the tube intoplace.
_ _Btower
Outlet Blower
Tube
Gmo va-_ _ Rtb
• Tightenthe tube clamp by turningthe
knobclockwise.
• To removethe tube, rum the knob
counterclockwise to loosendamp;
removetube.
OPTIONAL VACUUM KIT
Yourblowercan be convertedto a vac-
uum by installingoptionalVacuumKit
#358.799900. This kitcan be pur-
chased at your nearest Searsstore.
VACUUM BAG ASSEMBLY
• Placethe smallend of vacuumbag
overthe bloweroutletand clamp_.
Btower
Ve]cmStrap
Tightenthe Ve/crostrap securely.
•"Make sure the zipperon the bag is
closedcompletely.
• Secure the ends of the shoulder
strap by routingthe strapthroughthe
buckleas shown.
-4-