MD SPORTS 54804 Instrucciones De Armado página 5

ASSEMBLY INSTRUCTIONS
1. Find a clean, level place to begin the assembly of your Combo table. The table will be
assembled upside down and then turned over on its legs once the assembly completed.
This game table is heavy, and tuning it over will require at least two strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown
on the parts identifier below. Carefully cut or tear the four corners of the box so that the
bottom of the box can be used as your work surface.
FIG.1 POCKET ASSEMBLY
3. Attach the Side Pocket (#21) to the bottom of Billiard Cabinet (#1) using four Screws (#17)
per Side Pocket. See FIG.1.
4. Attach the Corner Pocket (#22) to the bottom of Billiard Cabinet (#1) using two Screws (#18)
per Corner Pocket. See FIG.1.
5. Repeat the steps above for the other pockets.
FIG.2 LEG ASSEMBLY
6. Attach the Plastic Leg Base (#27) to bottom of the
Left #4) and Right(#5) Leg using two Plastic Screws
(#14) per Leg Base. See FIG. 2.
7. Next, screw the Leg Leveler (#26) into the top of the
Leg Base (#27). See FIG. 2.