MD SPORTS 54804 Instrucciones De Armado página 6

FIG.3 BILLIARD TABLE ASSEMBLY
8. Attach the previously-assembled Legs (#4 and #5) to the end of Billiard Cabinet(#1) using
four Bolts (#8) See FIG.3.
9. Attach the Leg Side Panel (#6) between the inside of Left and Right Legs using four Screws
(#18) per Leg Side Panel. See FIG.3. <
10. Lift the table assembly from the floor
with two strong adults, turn it over,
and set table on its legs in the location
where you play. Go back and make sure
that all connections are tight.
FIG.4 BASKET OF BILLIARD
TABLE ASSEMBLY
11. Attach the Corner Basket (#23)
and Side Basket (#24) to Billiard
Cabinet (#1) using two Screws (#15)
per Basket. See FIG.4
CABINET ponoT DONOTLEAN THE
HOLD TABLE
CAUTION: Two strong adults are recommended to turn the table over as shown. Noe TABLE ON ITS LEGS!
1. Lift the table off the ground.
2. Turn the table over. Al
3. Place it on all four feet at the same time on the ground.