Descargar Imprimir esta página

Jata JVVT3043 Instrucciones De Uso página 8

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
• Do not connect the appliance to the mains without checking
that the voltage on the rating plate and that of your household
are the same.
• VERY IMPORTANT: Do not immerse the fan in water or any
other liquid.
• This appliance has been designed for domestic only. Don't
allow children play with the appliance. Keep the fan out of the
reach of children.
• Make sure neither the appliance nor the cable are in direct
contact with hot surfaces or objects.
• Always place it on a flat and stable surface.
• Do not use outdoors.
• Do not put the fingers or other objects into the slits to prevent
the engine block.
• Manipulation or replacement of any component must be
performed by an authorized service centre.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid a danger.
ASSEMBLING INSTRUCTIONS
• Joint the two half parts of the base (3) making them coincide.
• Fit the base (3) in the notches being sure the cable is in its place.
INSTRUCTIONS OF USE
• Remember the fan always must be placed on a flat and stable surface.
• Plug the appliance into the mains.
• Select the desired time for the appliance to be on, by turning the timer (4) till maximum 120 minutes, if you
don't want timer function set the knob in the
• Turn the speed selector (2) to:
- Position 0 - Off.
- Position 1 - Minimum speed.
- Position 2 - Medium speed.
- Position 3 - Maximum speed.
• To start the oscillation function, turn the speed / oscillation selector (2):
- Position 1 -
Minimum speed.
- Position 2 -
Medium speed.
- Position 3 -
Maximum speed.
position. In position "0" the unit will be off.
8

Publicidad

loading