Descargar Imprimir esta página

Silk’n FAC04 Manual De Usuario página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

5
Charging
• Fully charge the product before first use and when
the battery power is low.
• When the battery power is low, the battery level
indicator lights flash 3 times before the product
automatically switches off. Recharge the product.
• If the product is to be stored for an extended
period, the battery level should be checked and the
product should be charged regularly.
• The product cannot be used during charging.
1. Plug the smaller end of the USB cable
port
of the controller
16
2. Plug the larger end of the USB cable into the USB port of a
compatible USB power source (e.g. USB power adaptor).
3. Plug the USB power adaptor into a mains socket for
charging.
Charging starts automatically. Check the battery level
indicator lights
1 indicator light = 25 % charged
2 indicator lights = 50 % charged
3 indicator lights = 75 % charged
4 indicator lights = fully charged
4. When charging is done, unplug the USB power adaptor
from the mains socket and disconnect the USB cable from
the charging port.
6
Assembly
Assemble the product as folllows (see Fig. B):
1. Open the hook-and-loop fasteners on the elastic straps.
2. Guide the hook-and-loop fasteners through the openings
on the face mask
Small elastic straps
Large elastic straps
Medium elastic straps
3. Close the hook-and-loop fasteners to secure the elastic
straps on the masks.
.
9
for the charging progress:
10
and neck mask
1
Small top openings of the
5
face mask
Large side openings of the
6
face mask
Side openings of the neck
7
mask
into the charging
18
:
2
EN
10

Publicidad

loading